Phone line activation is dependent upon your service contract.
To use VoIP functionality of the phone, plug one end of the phone line into the activated phone connector on the back of the unit. Plug the other end of the Ethernet cable into the Ethernet connector of your computer. Plug one end of the Ethernet cable into the Ethernet connector on the back of the unit. Plug the AC power adapter cord into an AC outlet. Perform the following tasks before attaching the power cord or powering up the unit: If you want to use the VoIP functionality, you need an RJ-11 phone cable and a telephone. Basic installation equipment needed are the power adapter, Ethernet cable, a PC or laptop computer and the CPE device. Two RJ-11 telephone cables are required if your service provider has supplied you with two telephone numbers. Table 2-1 In the box with your CPE, you should have To install the Desktop CPE i 885 Series, review the following sections:īefore you begin installation, check that you have received the following items with your Desktop CPE i 885: Indicates if the device is powered or not. Indicates the status of the VoIP connection. Indicates if Wi-Fi is enabled or disabled. 
The LEDs also indicate the signal strength, and if Wi-Fi is enabled. The LEDs show the status of the initialization during and network connections during power up. The front of the CPE unit contains LED Link/Activity indicators. The CPE device provides the following features: 6-1Ĭhapter 7: Important Safety and Legal Information.
0 kommentar(er)
